The Technology of Laser Cutting and Its Advantages

Using laser to cut materials is known as laser cutting and is usually used by industries. How does this work? Well, a computer is used to direct a high power laser for the material to be cut. Once the laser is used on the material it usually melts or burns and a high quality surface finish is produced. These are also known as industrial laser cutter machines and they are used to cut flat sheet materials.

There are different kinds of laser cutting:

CO2 laser machines are used for cutting, boring and engraving. It is used for Industrial cutting of material. The CO2 lasers are used by passing a current through the gas mix or using Radio Frequency energy.

The Radio Frequency (RF) method is more popular as they are not prone to problems such as electrode erosion which is prevalent in the other methods. The gas flow can also affect performance. You can check it from the original source to make sure it is really the right information.

The neodymium Laser (ND): is also used for boring. But here high energy pulses are used using a low repetition speed.

The Nd-YAG laser: here very high energy pulses are used for boring and engraving as well as trimming.

Laser cutting is highly successful because it is a neater, cleaner and faster way of cutting as compared to the traditional methods of cutting. The laser beam is very precise and quick and is preferred over the traditional ways of cutting as some of the materials are very difficult to cut. High energy is used to do this specialized way of cutting. It is also the most cost-effective method of cutting high precision parts. Since the parts a laser cut time is saved as parts do not need to be cut manually. Learn more detailed information at

This process is complex and uses a stimulating laser material by electrical discharges. Once the lasing material is stimulated using a partial mirror the beam is reflected internally. Mirrors are used to direct the light to the lens so that the light is projected to the lens. There are various methods in cutting using the laser technology used to cut different material. They are vaporization, melt and blow, scribing, thermal stress cracking.

The amount of laser cutting power required for a job depends on the material type, thickness, process used, and desired cutting rate.

Laser Cutting

Laser cutting services are common and useful for those who don’t want to outlay capital to buy an expensive laser machine.  Some may opt to purchase a smaller and more affordable hobby laser.  You can see info about what to look for here.  Anyway, laser cutting services are offered by a variety of companies all over the world.  You can simply Google “laser engraving / cutting services”  along with your location and you will find several shops to choose from.  The advantages of Laser cutting services are that they are ideal for making custom parts quickly and economically.  Find info on Boss Laser here on TheFabricator website:

Laser cutting is a process through which complex materials can be cut in a precise manner. Laser cutting can be performed on a wide variety of materials and is very successful compared to other forms of cutting. Log on to our website and figure out the advantages of this amazing process. While you can get information on this article, it is highly advisable to do some additional research from the internet to compare the information and to make sure you are making the right decision which is vital.  To review companies look into what employees say as well:  Full Spectrum laser reviews.